Tubewell Steel & Engg. Co. is a leading manufacturer and stockist specializing in Alloy Steel Pipes, Tubes, Fittings and Flanges for critical industrial applications.
2.25% Chromium – 1% Molybdenum seamless alloy steel pipes with high creep strength for main steam, reheat and hydrogen service.
Tubewell Steel & Engg. Co. manufactures and stocks ASTM A335 P22 pipes – a 2¼Cr-1Mo ferritic alloy steel with significantly higher creep-rupture strength than P11. P22 is the long-established choice for main steam and hot reheat piping, refinery hydroprocessing units and other high-pressure lines operating up to about 600°C.
Proven creep strength for high-pressure steam and hydrogen lines
ASTM A335 P22 is a seamless ferritic alloy steel pipe with 1.90–2.60% chromium and 0.87–1.13% molybdenum. Doubling the molybdenum level of P11 gives P22 markedly higher creep and stress-rupture strength, allowing thinner walls or higher design temperatures, while the 2.25% chromium content improves resistance to oxidation and high-temperature hydrogen attack. The grade is widely used for continuous service up to about 600°C (1110°F).
P22 pipes are supplied full or isothermal annealed, or normalized and tempered with a minimum tempering temperature of 675°C (1250°F). Tubewell stocks hot-finished and cold-drawn P22 pipes in all popular schedules, complete with heat-number traceability, EN 10204 3.1 mill test certificates, IBR Form III-A on request and third-party inspection by BV, TÜV, SGS, Lloyd's or EIL.
Standard supply range for ASTM A335 P22 pipes
| Parameter | Details |
|---|---|
| Standard | ASTM A335, ASME SA335 |
| Grade | P22 (UNS K21590) |
| Type | Seamless – Hot Finished / Cold Drawn |
| Size (NB) | 1/2" NB to 24" NB |
| Outer Diameter | 21.3 mm to 610 mm |
| Wall Thickness | SCH 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS |
| Length | Single Random, Double Random, Cut Length (up to 12 m) |
| Ends | Plain End, Bevelled End, Threaded |
| Heat Treatment | Full / Isothermal Annealed or Normalized & Tempered (temper min. 675°C) |
| ASME P-Number | P-No. 5A, Group 1 |
| Surface | Black Painted, Varnished, Anti-rust Oil, Pickled |
| Dimension Standard | ASME B36.10M |
| Testing | Hydrostatic, Ultrasonic, Eddy Current, Flattening, Flaring, Hardness, PMI |
| Certificates | EN 10204 3.1 / 3.2, IBR Form III-A, TPI Reports |
International equivalents of A335 P22
| Standard | ASTM | UNS | EN | DIN / W.Nr. | JIS | BS |
|---|---|---|---|---|---|---|
| P22 | A335 P22 | K21590 | 10CrMo9-10 | 1.7380 | STPA 24 | 3604 HFS 622 |
Weight %, as per ASTM A335
| Grade | C | Mn | P | S | Si | Cr | Mo |
|---|---|---|---|---|---|---|---|
| A335 P22 | 0.05 – 0.15 | 0.30 – 0.60 | 0.025 max | 0.025 max | 0.50 max | 1.90 – 2.60 | 0.87 – 1.13 |
Minimum values at room temperature
| Grade | Tensile Strength | Yield Strength (0.2%) | Elongation (Long.) | Elongation (Trans.) |
|---|---|---|---|---|
| A335 P22 | 415 MPa (60 ksi) min | 205 MPa (30 ksi) min | 30% min | 20% min |
Typical values (for reference)
| Property | Metric | Imperial |
|---|---|---|
| Density | 7.80 g/cm³ | 0.282 lb/in³ |
| Melting Range | 1450 – 1510 °C | 2640 – 2750 °F |
| Modulus of Elasticity | 205 GPa | 29.7 × 10³ ksi |
| Thermal Conductivity (100°C) | 36 W/m·K | 20.8 BTU/h·ft·°F |
| Mean Thermal Expansion (20–300°C) | 12.6 µm/m·°C | 7.0 µin/in·°F |
| Specific Heat | 0.46 J/g·°C | 0.11 BTU/lb·°F |
| Max. Service Temperature | ≈ 600 °C | ≈ 1110 °F |
As per ASME B36.10M – wall thickness (mm) / weight (kg/m)
| NPS | OD (mm) | SCH 40 WT | SCH 40 Wt | SCH 80 WT | SCH 80 Wt | SCH 160 WT | SCH 160 Wt |
|---|---|---|---|---|---|---|---|
| 1/2" | 21.3 | 2.77 | 1.27 | 3.73 | 1.62 | 4.78 | 1.95 |
| 3/4" | 26.7 | 2.87 | 1.69 | 3.91 | 2.20 | 5.56 | 2.90 |
| 1" | 33.4 | 3.38 | 2.50 | 4.55 | 3.24 | 6.35 | 4.24 |
| 1 1/4" | 42.2 | 3.56 | 3.39 | 4.85 | 4.47 | 6.35 | 5.61 |
| 1 1/2" | 48.3 | 3.68 | 4.05 | 5.08 | 5.41 | 7.14 | 7.25 |
| 2" | 60.3 | 3.91 | 5.44 | 5.54 | 7.48 | 8.74 | 11.11 |
| 2 1/2" | 73.0 | 5.16 | 8.63 | 7.01 | 11.41 | 9.53 | 14.92 |
| 3" | 88.9 | 5.49 | 11.29 | 7.62 | 15.27 | 11.13 | 21.35 |
| 4" | 114.3 | 6.02 | 16.07 | 8.56 | 22.32 | 13.49 | 33.54 |
| 6" | 168.3 | 7.11 | 28.26 | 10.97 | 42.56 | 18.26 | 67.56 |
| 8" | 219.1 | 8.18 | 42.55 | 12.70 | 64.64 | 23.01 | 111.27 |
| 10" | 273.1 | 9.27 | 60.29 | 15.09 | 95.98 | 28.58 | 172.33 |
| 12" | 323.9 | 10.31 | 79.71 | 17.48 | 132.05 | 33.32 | 238.76 |
| 14" | 355.6 | 11.13 | 94.55 | 19.05 | 158.10 | 35.71 | 281.70 |
| 16" | 406.4 | 12.70 | 123.30 | 21.44 | 203.53 | 40.49 | 365.35 |
| 18" | 457.0 | 14.27 | 155.80 | 23.83 | 254.55 | 45.24 | 459.37 |
| 20" | 508.0 | 15.09 | 183.42 | 26.19 | 311.17 | 50.01 | 564.81 |
| 24" | 610.0 | 17.48 | 255.41 | 30.96 | 442.08 | 59.54 | 808.22 |
WT = Wall Thickness in mm, Wt = Weight in kg/m. Values are nominal; actual weights may vary within ASTM tolerances.
Where ASTM A335 P22 pipes are used
Main steam, hot reheat and high-pressure feed piping.
Superheater headers, links and HRSG high-pressure circuits.
Hydrotreater and hydrocracker lines under hydrogen partial pressure.
Reformer outlets and high-temperature process piping.
Ammonia synthesis loop and hydrogen-rich gas lines.
High-pressure exchanger nozzles and connecting lines.
Quality you can verify on every heat
Large inventory for fast dispatch
MTC EN 10204 3.1 / 3.2
Positive material identification
Pan-India & export shipping
Quick answers about A335 P22 pipes
Get competitive pricing, ready stock and complete documentation.
